Sections/Elevation/3D Document/Worksheets/Details etc., Annotations, Texts, Labeling, Autotext/Project Info, Layouting, Renovation Filters, Graphic Overrides, Revisions/Issues, Printing/Plotting, PDF, Mark-Up, etc.
Moderators: Karl Ottenstein , LaszloNagy , ejrolon , Barry Kelly , gkmethy
By
emerich - Fri Nov 15, 2019 5:57 pm
- Fri Nov 15, 2019 5:57 pm
#303799
Hi everyone
Here is a problem I'm having in AC22. See image below.
In short the zone fills only show up within walls - and not in the room itself. Note these are light coloured screen fills and typically will show anything in front or behind.
No graphic overrides, no SEOs.
How can I get the zone fill to show up normally?
Thanks
www.standard-practice.ca
AC22 USA Full
MacBook Pro
2.9 GHz Intel Core i9
Since AC 4.55
Rank: Junior member Posts: 73 Joined: Tue Sep 19, 2006 10:30 pm Status: Off-line
Location: toronto
- Sun Nov 17, 2019 4:11 pm
#303841
Hello emerich,
Do you try to put you zones behind ? Or all other elements in front ?
Christophe - FRANCE
Archicad Designer and Teacher
Archicad 15 to 23 FRA FULL
OSX 10.13.6
"Quality is never an accident; it's always the result of an intelligent effort " - John Ruskin
Rank: Active member Posts: 442 Joined: Thu Oct 19, 2017 8:38 am Status: Off-line
Location: Nantes FRANCE
ARCHICAD user since: AC15
ARCHICAD version: AC23
- Mon Nov 18, 2019 2:26 am
#303847
Not quite sure what I am looking at, but I looks as if the line that draws your dishwasher is set as a zone boundary while none of your walls are...
AC18-23 AUS 3003
Self-taught, bend it till it breaks.
Win10 | E5620 x 2 | 24GB | K2200
Rank: Senior member Posts: 1317 Joined: Tue May 02, 2017 6:27 am Status: Off-line
Location: Australia
ARCHICAD user since: 2014
Jump to:
Select the forum to jump to