The Global ARCHICAD Community

Stay informed. Get help. Share your knowledge.

Sections/Elevation/3D Document/Worksheets/Details etc., Annotations, Texts, Labeling, Autotext/Project Info, Layouting, Renovation Filters, Graphic Overrides, Revisions/Issues, Printing/Plotting, PDF, Mark-Up, etc.

Moderators: Karl Ottenstein, LaszloNagy, ejrolon, Barry Kelly, gkmethy

Hi, I have a project that needed to draw a door with additional insect screen door.
Is there any way to create that using door tool?

What i have done is create 2 doors, 1 normal door with frame
and the other is door leaf only (by putting frame width and depth value to 0)

this is what it looks like

but the problem if i try to put 0 value to the frame width, the door will have a blue line on 2d symbol which is printable
and i couldn't find which option to turn it off

blue line on the leaf only door that i wish to remove

Would be appreciated for the help

Thank you :D
I don't use these door objects but having a quick look I think this will work.
Set a 'double rebate' to the frame and adjust the sizes so it is symmetrical to the frame thickness.
Then place 2 complete doors with frames.