The Global Archicad Community

Stay informed. Get help. Share your knowledge.

Speed/Display issues/unfamiliar error messages, crashes/hangs or any other problems regarding Archicad (Example: I get an error message when the 3D Window is generated, please help!).
Note: If your problem seems to be an Archicad error please always report it to your local reseller!

Moderators: ejrolon, Barry Kelly, Karl Ottenstein, LaszloNagy, Gordana Radonic, nbalogh, gkmethy, mnguyen

You are likely correct; there are so many switches and buttons that have to be set right and that can sometimes be accidentally set incorrectly, and its the way you are holding your tongue at any given minute. I did try to solve the issue every way I could think of and with the suggestions replied to me here - but the issue got solved by an end run.

Still - the Show True Line Weights setting when checked showed not true line weights, and when not checked did show true line weights; that had to be some type of file corruption.
Hi Jeff,

Thank you for sharing the issues and I am very sorry about the experience!

I am wondering if you can share with me the problematic file that is showing mentioned issues for a deeper investigation? Let me know if you need a secure link to send the file as well!

Looking forward to hearing from you!

Best regards,

P/s: on a side note, I am wondering if the NCS Scale bar issue is similar to this one here?
mnguyen, thanks for the reply, it has bee months since I had worked on this file and just now opened up to work on it.

still can not see colors when I believe I should be able to - trying to attach .pln file to this reply but does not accept .pln file as an attachment??.
Dear Jeff,

Thank you very much for getting back to me!

Unfortunately, the forum has certain limitations regarding the file types and size. I will send you a link in the private message, with which you can upload the file directly to us for investigation.

Looking forward to hearing from you!
Best regards,