The Global ARCHICAD Community

Stay informed. Get help. Share your knowledge.

Speed/Display issues/unfamiliar error messages, crashes/hangs or any other problems regarding ARCHICAD (Example: I get an error message when the 3D Window is generated, please help!).
Note: If your problem seems to be an ARCHICAD error please always report it to your local reseller!

Moderators: Barry Kelly, Karl Ottenstein, LaszloNagy, ejrolon, gkmethy

By Piotr T
#298191
I suppose this is not only an Archicad problem, but it occured in my Archicad print window. Somehow the window pops up and its cropped. It is impossible to strech it like a standard window. I'm rushing through the Internet in search of answer, but there is none. Any help with that?

Thank you!

Image
User avatar
By Barry Kelly
#298209
Lingwisyer wrote:
Tue Jun 11, 2019 3:54 am
Do you have scaling active in Windows/OSx?
By this Ling means your display scaling.

Barry.
Attachments
display_scale.jpg
User avatar
By Barry Kelly
#298498
Piotr T wrote:
Tue Jun 18, 2019 9:10 am
I do have 150% (I work in 3840x2160). Changing the scale settings seems to have no influence in this case.
You may have to restart your machine to see any change to the dialogue.
It may not be the solution though.

Archicad works best at 100%, but I think 200% also works - but may too big.
I have heard of problems when other scales are used.

Barry.
By Piotr T
#298502
OK, that works good after I restarted the machine. I've changed the settings again to 150% and it also works well.

Thank You guys! Nice that I'm always finding an answer here. Much apreciate!
User avatar
By Barry Kelly
#298534
Piotr T wrote:
Tue Jun 18, 2019 10:58 am
I've changed the settings again to 150% and it also works well.
It may only look good until the next time you restart your machine.

Barry.
User avatar
By Lingwisyer
#298535
Piotr T wrote: I've changed the settings again to 150% and it also works well.

Chances are that if you restart your machine again, the scaling issue will appear again...