kkouroun wrote: ↑
Thu Apr 30, 2020 12:08 pm
I've created a custom panel object using slab tool with thikness 0.01m. When I then use it with the curtrain tool, it goes automatically to a minimum thickness of 0.032m!
Is it possible to have a curtain wall with really thin custom panels?
Thank you in advance.
(I use Archicad 20)
First, I hope that you and your loved ones are doing well during these challenging times!
Thank you for your question!
Unfortunately, this was a bug with the old Curtain Wall tool. The parameter script does not run when changing the custom panel's thickness values. This defect was fixed on ARCHICAD 22. If you are using ARCHICAD 20, there is a workaround for this issue:
1. Go to edit mode
2. Select all panel(s) that is set to use Custom Panel
3. Set the desired panel thickness, e.g. 10mm in Panel's settings, under Panel Type and Geometry
tab, then click OK.
4. When you open up the dialog the second time, you will be able to enter 10mm as panel thickness in the Curtain Wall Panel Settings
I hope this will help you with the issue. As ARCHICAD 20 is out of support right now, there won't be any update to it. Thank you for your understanding, and once again I apologize for the inconvenience!
Let me know if you need any further help!
Technical Support Engineer
For Troubleshooting and useful Tips & Tricks visit