The Global Archicad Community

Stay informed. Get help. Share your knowledge.

Modeling and drafting in Archicad. (Example: How can I model a Roof soffit/fascia?)

Moderators: Karl Ottenstein, LaszloNagy, ejrolon, Barry Kelly, gkmethy

By se77e
#312439
Hi,

any idea how to do corner stair type using stair tool?

Thanks
Attachments
01.jpg
01.jpg (6.22 KiB) Viewed 173 times
User avatar
By Jp1138
#312440
You can edit the steps and give them any shape you want. Stair structure won´t follow, though, so you could just turn it off and model only steps with the thickness you need.
Attachments
Escalera 1.png
Escalera 2.png
Escalera 2.png (9.7 KiB) Viewed 170 times
Escalera 3.png
User avatar
By Barry Kelly
#312467
To keep the structure following the stair, just create one stair and change the boundary on one side so it is at 45°.
Then mirror a copy on this 45° angle and you have your corner stair - or rather 2 stairs.


Barry.
User avatar
By Barry Kelly
#312468
Also I have moved the post.
Please try to choose an appropriate section of the forum to post in.


Barry.
User avatar
By LaszloNagy
#312517
Barry Kelly wrote:
Fri Jun 26, 2020 2:01 am
To keep the structure following the stair, just create one stair and change the boundary on one side so it is at 45°.
Then mirror a copy on this 45° angle and you have your corner stair - or rather 2 stairs.


Barry.


To illustrate Barry's post, this is modeled using 2 Stair elements - one Stair element, then mirrored along the 45-degree line. You will also need to select the 45-degree Boundary of both Stair instances and Hide it using Pet Palette commands.

Ćorner Stair.png