The Global Archicad Community

Stay informed. Get help. Share your knowledge.

Modeling and drafting in Archicad. (Example: How can I model a Roof soffit/fascia?)

Moderators: Karl Ottenstein, LaszloNagy, ejrolon, Barry Kelly, gkmethy

User avatar
By avishiplu
#312592
Hello

I need guidelines in the wall modeling process.

Here is the segment of a wall.
In the first part, I need to apply Tiles on one side of the wall.
In the 2nd Part, there are Tiles on both sides of the wall.
In the 3rd part, there are tiles finishing on one side.


To draw this segment I used different complex profiles. It seems my process is not ok. Cause
-There is a line between the connection between the profiles. (See the attachment)
-This process requires extra time.


Can anyone please suggest me which process is effective for modeling a wall. Is there any best practice for modeling a wall with finishing.


N.B: I use Archicad 23
Attachments
Capture.JPG
Capture-2.JPG
User avatar
By Christophe Fortineau
#312593
avishiplu wrote:
Tue Jun 30, 2020 10:49 am
-There is a line between the connection between the profiles. (See the attachment)
If you use the same material and if your walls are coplanar, there is no line.
User avatar
By Jp1138
#312594
The reference lines for the different walls should be continuos or lines may show in unexpected places, so I would check if that´s the case.