The Global Archicad Community

Stay informed. Get help. Share your knowledge.

Modeling and drafting in Archicad. (Example: How can I model a Roof soffit/fascia?)

Moderators: Karl Ottenstein, LaszloNagy, ejrolon, Barry Kelly, gkmethy

User avatar
By Barry Kelly
#312767
Yep, worked perfectly for me, except I don't have the 4D library.

I opened it in 23, is that the version you are using?

Barry.
Attachments
wall_problem_3.jpg
wall_problem_3.jpg (13.01 KiB) Viewed 138 times
User avatar
By Barry Kelly
#312770
That last file you sent (7234KB) opened fine for me.
It shouldn't have anything to do with the library.

Make sure you have the latest build for 23 (4006).

Maybe shut Archicad down and reopen the file you just sent.


Barry.
By Too Long
#312771
Hmmm...

I restarted the machine and still nothing.

Ive even used a complex profile to see if that work and nada.
Attachments
aaa.png
User avatar
By Barry Kelly
#312772
Are you sure you are opening the repaired file?
Maybe try the repair again.
As soon as I did the repair, got the message something was fixed, the elevation was fine.

https://www.dropbox.com/s/splgf0g693s77 ... d.pln?dl=0

Here is the file you sent, I have re-saved it.

Barry.
By Too Long
#312773
Yours worked perfectly...Thanks.

I did open the repaired file because I saved-as when prompted.

i even repaired the repaired file and still nothing but yours is working perfectly.

Now to see if I can get the template to work.

Thanks Barry, outstanding effort.