The Global Archicad Community

Stay informed. Get help. Share your knowledge.

Modeling and drafting in Archicad. (Example: How can I model a Roof soffit/fascia?)

Moderators: ejrolon, Barry Kelly, Karl Ottenstein, LaszloNagy, Gordana Radonic, nbalogh, gkmethy, mnguyen

User avatar
By Dave Brach
#324460
I am trying to create a "U" shape stair with a step in the landing. It needs to be very compact so I want the 2 landings to be rectangles, not "L" shape, and no space between the 2 flights. So I create a flight, then a landing, then for the next landing I use "winder with equal angles", then the final flight. But the 2 landings are still modified "L" shapes, not rectangles.
Attachments
Screen Shot 2021-04-10 at 7.03.16 PM.png
Screen Shot 2021-04-10 at 7.03.16 PM.png (112.78 KiB) Viewed 92 times
Screen Shot 2021-04-10 at 7.02.31 PM.png
Screen Shot 2021-04-10 at 7.02.31 PM.png (32.5 KiB) Viewed 92 times
User avatar
By Barry Kelly
#324488
Like this?
Try these settings.

stair_corner_landing.jpg
stair_corner_landing.jpg (149.51 KiB) Viewed 65 times

Use the standard landing and set the riser offsets to zero.
Turn off the rule for automatic landing length.
Draw the reference line on the outside of the stair.
Make sure the distance between points 2 & 3 is twice the flight width.

You can do it also using the winder instead of the landing, but then you have place the start and end of the first flight, then switch to 'winder' in the pet palette, add the next 3 nodes for the winder (landing), and then switch back to 'flight' and add the last node.


Barry.