The Global ARCHICAD Community

Stay informed. Get help. Share your knowledge.

Sections/Elevation/3D Document/Worksheets/Details etc., Annotations, Texts, Labeling, Autotext/Project Info, Layouting, Renovation Filters, Graphic Overrides, Revisions/Issues, Printing/Plotting, PDF, Mark-Up, etc.

Moderators: Barry Kelly, Karl Ottenstein, LaszloNagy, ejrolon, gkmethy

By punnky_archicad
#299211
Hi,

In my country we have a standard that we have to reduce the area of balcony, terrace, loggia so it is multiplied by a factor for example balcony x 0,5 (50%) to get a "net area"
Firstly, how do I reduce the area in the zone stamp on the floor plan?
Secondly is it possible to list out text on the zone stamp like this example: 6x0,5=3m2
#299218
Hello,

For that you have two types of area : calculated and measured

You have to ask the measured for your balcony and apply a weighting of 50%

The zone stamp can contain one and/or the other of these two types of surface and all other personalized texts for the good understanding of space informations
By Bambooqn
#300450
punnky_archicad wrote:
Thu Jul 11, 2019 10:16 am
Hi,

In my country we have a standard that we have to reduce the area of balcony, terrace, loggia so it is multiplied by a factor for example balcony x 0,5 (50%) to get a "net area"
Firstly, how do I reduce the area in the zone stamp on the floor plan?
Secondly is it possible to list out text on the zone stamp like this example: 6x0,5=3m2
Are you from Viet Nam? ^^