The Global ARCHICAD Community

Stay informed. Get help. Share your knowledge.

Plan, Section, Elevation, Schedule, Layouting...

Moderators: Barry Kelly, Karl Ottenstein, LaszloNagy, ejrolon, gkmethy

User avatar
By Jevrod
#284077
It could help if we could give a name to the camera, instead of "camera 1", "camera 2", etc...

This is difficult to find the camera we want. If we are on a elevation or in the 3D view and we need to go to the camera of the kitchen, we need to go back to the plan, zoom to search the kitchen, and activate the camera. The second solution is to test each camera one by one, and if it is the 49e it takes time.

It would be usefull to have an option that allow to automaticly assign the name of the zone for interior camera, and the orientation for exterior camera, for example Kitchen Camera, Bedroom 2 Camera, South-West camera, etc...
User avatar
By Brad Elliott
#284087
Save the cameras into your view map. That way you can name them as well as save the view settings you want.
User avatar
By philips
#284866
Save the cameras into your view map. That way you can name them as well as save the view settings you want.
In my opinion this workaround is OK for one person working on a project but for teamwork leads to mistakes and complactions.