The Global Archicad Community

Stay informed. Get help. Share your knowledge.

Everything about using Libraries and Library Parts - Doors/Windows/Objects/Stairs etc. (Example: How can I display a Transom above my Door?)

Moderators: Karl Ottenstein, LaszloNagy, ejrolon, Barry Kelly, gkmethy, Gergely Feher

By mukster
#316582
Archicad 23, MAC platform, When I try to put in a pocket door object, it shows up as a wide opening. Can't adjust it to show as a simple 3; door with the pocket going into the wall. I'm sure there's a simple setting that I just can't find.
User avatar
By Lingwisyer
#316589
mukster wrote:simple 3; door with the pocket going into the wall

Not a possible configuration with the default Aus / Int libraries. Can you post a screenshot of the issue as well as what ever library you are using?



Ling
User avatar
By Stress Co.
#316598
What door object are you using?
Are you trying to do 3 panels that all pocket into the wall?
This is D1 Pocket 23:
Attachments
Screen Shot 2020-09-16 at 1.47.47 AM.png
User avatar
By Barry Kelly
#316599
I think mukster might mean a 3 foot wide door rather then 3 panels - basically as Marc has shown.
But I may be wrong.

mukster,
Can you post an image of the door in plan or 3D with the settings as Marc has shown?
This will give us an idea of what is happening.
As you can see it seems to be working fine for Marc.


Barry.