The Global Archicad Community

Stay informed. Get help. Share your knowledge.

Everything about using Libraries and Library Parts - Doors/Windows/Objects/Stairs etc. (Example: How can I display a Transom above my Door?)

Moderators: Karl Ottenstein, LaszloNagy, ejrolon, Barry Kelly, Gordana Radonic, nbalogh, mnguyen, gkmethy, Gergely Feher

By JKL
#324897
I have one window that won't close in my model. It is set to 0", all my settings say it should be closed. I can delete it, place a new window, eye dropper it...no matter what it is open. I've changed the settings to open then back to closed. No change. Restarted Archicad, no change. All my other windows are fine. On the elevations you can see the brick behind it. Any ideas??


**EDIT** it is closed, the bottom pieces of glass are just not showing as blue. The materials are set correctly, I'm not sure how to fix it?

Archicad24
Mac
Attachments
Screen Shot 2021-04-20 at 9.32.29 AM.png
Screen Shot 2021-04-20 at 9.32.29 AM.png (413.03 KiB) Viewed 117 times
Screen Shot 2021-04-20 at 9.32.44 AM.png
Screen Shot 2021-04-20 at 9.32.44 AM.png (1.15 MiB) Viewed 117 times
User avatar
By sboydturner
#325083
Just a quick note that all your windows seem to be installed inside out, bottom sash should be inside so that water running down face of exterior of top sash drips down to the sill, the way you have them shown the water would drip inside !!

Regards
Scott