The Global Archicad Community

Stay informed. Get help. Share your knowledge.

View only topic: Collection of Best Practices edited by the moderator. (Please post your tips into one of the topics under section II.)

Moderators: Karl Ottenstein, LaszloNagy, ejrolon, Barry Kelly, Gordana Radonic, nbalogh, mnguyen, gkmethy

#83710
I was at a User Group meeting yesterday at which Ken Good was showing how to use the "merge wall" command to create walls with real cavities. This gave me the following idea to get round a problem I had come across earlier in the week with a wall that needed more than eight skins.

Image

In the example shown in the attached image are two metal stud walls which go to make up a party wall between Flats.

Select the two walls and use the "merge wall" command

Image

This creates a Custom Complex Profile

From the Complex Profiles palette click the "Capture element's profile Button" and then click the "Store Profile" button. You can then use this Profile for other walls in your Project.

A couple of bonuses you get with this method is you get a wall with a real cavity and you can insert a door into the wall instead of having to insert a door in one wall with a matching "empty" door in the other wall which has to be omitted from the Door Schedule

Image

A couple of things to bear in mind....

You can't use this on curved walls as Complex Profiles can only work on straight walls (it better be in AC11 or I will be a very grumpy bunny :evil: )

To edit the wall you will need to edit the Complex Profile.
Last edited by fuzzytnth3 on Tue Feb 20, 2007 2:29 pm, edited 1 time in total.