The Global ARCHICAD Community

Stay informed. Get help. Share your knowledge.

Modelling and drafting in ARCHICAD. (Example: How can I model a Roof soffit/fascia?)

Moderators: Barry Kelly, Karl Ottenstein, LaszloNagy, ejrolon, gkmethy

By AntonisAth
#271558
Hello!

I work in a plot that is inclined and i have many buildings in the plot.

The buildings (let's say) are the same but since the plot is inclined, each building is on a different elevation.
I want to find a way on each storey (for example on the ground floor), to have the correct altitude so any object can be seen correctly.
Because now some objects, slabs, walls etc. from the ground floor that is in a higher altitude are seen on the 1st floor of the building that is on a lower elevation...

Please let me know if you have any suggestions
By AntonisAth
#271654
AntonisAth wrote:Hello!

I work in a plot that is inclined and i have many buildings in the plot.

The buildings (let's say) are the same but since the plot is inclined, each building is on a different elevation.
I want to find a way on each storey (for example on the ground floor), to have the correct altitude so any object can be seen correctly.
Because now some objects, slabs, walls etc. from the ground floor that is in a higher altitude are seen on the 1st floor of the building that is on a lower elevation...

Please let me know if you have any suggestions


Anyone??