The Global Archicad Community

Stay informed. Get help. Share your knowledge.

Corner Window - Differing Reveal Depth

Everything about using Libraries and Library Parts - Doors/Windows/Objects/Stairs etc. (Example: How can I display a Transom above my Door?)

Moderators: ejrolon, Barry Kelly, Karl Ottenstein, LaszloNagy, gkmethy, Gergely Feher

 Reply
User avatar

Corner Window - Differing Reveal Depth

By Lingwisyer
-  Fri Oct 26, 2018 9:00 am #288106
Hi all,

How do you go about creating a corner window where each of the windows has a different reveal depth? There is no option for it...



Ling.
User avatar

Re: Corner Window - Differing Reveal Depth

By Barry Kelly
-  Fri Oct 26, 2018 9:40 am #288110
Don't use the corner window tool.
Use 2 separate windows and turn on the corner options.
I am not sure if this will work at the corner but you should be able to control the reveal depth separately.

Barry.
User avatar

Re: Corner Window - Differing Reveal Depth

By Lingwisyer
-  Fri Oct 26, 2018 10:05 am #288116
There are only options for corner angle, wall width, column size and offset from corner column...

Might have to start using my corner door Complex Wall Profile for windows as well...




Ling.
User avatar

Re: Corner Window - Differing Reveal Depth

By Barry Kelly
-  Fri Oct 26, 2018 10:28 am #288118
Does this work?
I don't use these windows so I am just playing.

Barry.
Attachments
corner_window_offset_2.jpg
User avatar

Re: Corner Window - Differing Reveal Depth

By Barry Kelly
-  Fri Oct 26, 2018 10:34 am #288119
Obviously the difference between my reveals was 30mm.

Barry.
User avatar

Re: Corner Window - Differing Reveal Depth

By Lingwisyer
-  Mon Oct 29, 2018 2:26 am #288167
That just changes the windows reveal from the post. I am wanting to retain a square post and have the post reveal to wall face be different.



Ling
 Reply
 Return to “Libraries / Library Parts”